|
Model / 型号 |
NPN D.on |
OAP-4004-NK |
OAP-4004S-NK |
OAP-4008-NK |
OAP-4008S-NK |
|
PNP D.on |
OAP-4004-PK |
OAP-4004S-PK |
OAP-4008-PK |
OAP-4008S-PK |
|
Sensing type / 检出方式 |
Through beam / 对照式 |
|
Resolution / 分辨率 |
60 mm opaque object 不透明物体 |
|
Sensing distance / 检出距离 |
0.1 M ～ 5 M |
0.1 M ～ 2 M |
0.2 M ～ 5 M |
0.2 M ～ 2 M |
|
Sensing Height / 检测高度 |
120 mm |
280 mm |
|
Emitting light / 发光源 |
Infrared LED(红外线发光LED)：850 nm |
|
No.of Beams/光轴数 |
4 |
8 |
|
Beam pitch / 光轴间距 |
40 mm |
|
Indicating LED / LED指示灯 |
5 LEDs each on emitter and receiver. |
7LEDs each on emitter and receiver. |
|
LEDs blink from top to bottom under the normal emission. All LEDs light up under the emitting circuit failure and will become blinking until the normal emission. |
|
Running type / 运转方式 |
More than a beam is covered ON﹙Dark On﹚
任意一个光束被遮断即输出 |
|
Operating voltage / 工作电压 |
DC12 ~ 24 V±10% (ripple P-P：10% Max.) |
|
Current Consumption / 消耗电流 |
Transmitter：30 mA Max. |
Transmitter：60 mA Max. |
|
Receiver：15 mA Max. |
Receiver：30 mA Max. |
|
Load current / 负载电流 |
100 mA Max at DC 24V |
|
Protection circuit / 保护电路 |
Reversed Supply circuit protection, Short circuit protection output
电源反接保护及输出短路保护 |
|
Response time / 反应时间 |
Off to On：15 ms Max. |
|
On to Off：20 ms Max. |
|
Insulation resistance / 隔离阻抗 |
20MΩ min. (DC500V) |
|
Voltage withstandabiligy / 绝缘耐压 |
AC1000V 60Hz for 60 Sec. |
|
Operating temperature/工作温度 |
- 10 ℃ ~ + 45℃ ﹙No freezing allowed不可结霜,结冰﹚ |
|
Ambient humidity / 工作湿度 |
35% ~ 85% RH 相对湿度 |
|
Storage temperature / 储存时温度 |
- 10 ℃ ~ + 45℃ ﹙No freezing allowed不可结霜,结冰﹚ |
|
Storage humidity / 储存时湿度 |
35% ~ 95% RH 相对湿度 |
|
Protection degree / 防水等级 |
IP62 |
|
Material / 外观材质 |
ABS |
|
Wiring method / 出线方式 |
Transmitter：M12 pigtailed type(5P) / M12接头15cm电线式 |
|
Receiver：M12 pigtailed type(5P) / M12接头15cm电线式 |
|
Weight /重量 |
Approx.200g |
Approx.253g |
