Model/型号 |
OAS2608D |
OAS2616D |
OAS2624D |
OAS2632D |
OAS2640D |
NO. of beams / 光束数 |
8 |
16 |
24 |
32 |
40 |
Detecting height / 检测高度 |
188 |
390 |
598 |
806 |
1,014 |
Beam Pitch / 光束间距 |
26mm |
Detecting Range / 检验距离 |
0.3m to 4m |
Resolution / 分辨率 |
30㎜ opaque object 不透明物体 |
Supplying voltage / 供应电压 |
DC 10V to 24V ± 10%(ripple P-P:10% Max.) |
Current consumption /电流消耗量 |
65mA Max. |
70mA Max. |
75mA Max. |
80mA Max. |
85mA Max. |
Electro-characteristics /电气特性 |
NPN open collector开放集极电路, Load current 负载电流: Max. 200mA (Max. DC30V) Remaining voltage 剩留电压: 200mA ~ Max. 2V |
Response time / 反应时间 |
Max. 20ms |
Indicating LED / LED 指示灯 |
■ Emitter发射机 ------- Power : Red LED ■ Receiver 接收器 ----- Power : Red LED Detecting 检测 : Red LED Stable status 稳定状态 : Red LED |
Light source / 光源 |
Infrared radiation diode 红外线发光LED(λ = 870nm) |
Running type / 运转方式 |
More than a beam is covered ON (Light ON)遮断涵盖一光束以上 |
Protection circuit / 保护电流 |
Reversed Supply circuit protection, Short circuit protection output 逆电流保护,短路保护输出 |
Connection / 连接 |
300㎜ connector mount cable连接插头固定线 |
Temperature / 温度 |
When Running 运转时:-10℃ ~ +55℃ (shouldn't be any condensation or frost) 不可有任何的凝结或结霜When keeping 保留时: -10℃ ~ +60℃ |
Humidity / 湿度 |
When running 运转时: within 35% ~ 85%RH 相对湿度, When keeping 保留时: within 35% ~ 95%RH 相对湿度 |
Ambient light / 周围光线 |
Sun light 日光 : Max.10000lx Ambient light 周围光线:Max. 3000lx |
Insulation resistance / 绝缘阻抗 |
20MΩ min.(At DC500V) |
Anti-voltage / 逆电压 |
AC1000V 50/60Hz for 60sec |
International protection /国际防水等级 |
IP64 (IEC) |
Anti-vibration / 反震动 |
1.5mm amplitude 振幅 2Hr, 3 directions each各自3方向 |
Anti-shock / 反电冲 |
100 m/2s X, Y, Z 2 hours each directions每方向2小时 |
Material / 材质 |
Case 外壳: Aluminum 铝, Side cover 侧盖: Zinc 锌, Lens cover 镜头盖: Acryl压克力 |
Weight / 重量 |
Approx.370g |
Approx.610g |
Approx.840g |
Approx.1,080g |
Approx.1,320g |
Optional Cable / 可选择线长 |
5M length 长度 |