|
◆Fiber amplifier mounting/detaching operation：
1. Mounting / 安裝
(1)To mount each amplifier to the attached mounting bracket or DIN rail in sequence.
(2)To connect two amplifiers close together by sliding the amplifier bodies.
2. Detaching / 卸下
To detach the amplifiers in sequence by sliding the amplifier bodies. Don't detach two amplifiers at a time. |
◆Fiber cables fixing operation：
1. Insert the fiber cables / 插入光纖
Open the protective hood and tilt the fiber lock lever to release the lock condition. Referring to the side seal of insertion position, fully insert the fiber cables into the mounting holes until the limit. Pull the fiber lock lever back to lock the cables.
2. Pull out the fiber cables / 拔出光纖
Open the protective hood and tilt the fiber lock lever to release the lock condition. Pull the fiber cables straight out from the mounting holes.
|
